*****************************************2025.01.22 H V1.9.8.2 H V1.9.8.0 (H2, H5, H9, H9 Enhanced, H15, H15 Enhanced, H20)********************************************************** [Supporting Software] NovaLCT V5.5.0 or later SmartLCT V3.5.13.Beta H Series_Windows (The software version after successful installation: SmartLCT V3.5.13.Beta. The H_4xfiber sending card is not supported) [New Features] None [Improvements] 1. Optimized the stability of the image loaded by the H_20xRJ45 sending card. 2. Optimized the display effect of an image with extremely narrow width loaded by a single Ethernet port to avoid flickering. 3. Optimized the fade transition effect of the H_16xRJ45+2xfiber sending card and H_20xRJ45 sending during preset switching. 4. Optimized the parameter restoration capability in the event of abnormal device restart. 5. Optimized the SDI connector stability. 6. Optimized the stability of IPC decoding. [Changes] None [Bug Fixes] 1. Fixed the issue where the backup function does not take effect on the H_20xRJ45 sending card. 2. Fixed the issue where the scheduled brightness adjustment does not take effect when all the cards are installed. 3. Fixed the issue where the image output by an OPT port is abnormal when working with the Q8. 4. Fixed the display issue of a mosaic image with the layout of one row and multiple columns. [Notes] 1. Once the OPT enhanced mode is enabled on the Other Settings page for the H series devices, the CVT10 or CVT4K of V1.3.0 or later is required to ensure normal output. 2. Once the OPT enhanced mode is disabled on the Other Settings page for the H series devices, the CVT10, CVT4K , MCTRL660 PRO or MCTRL1600 is required to ensure normal output. 3. When the device works with NovaLCT of V5.6.0 or V5.6.1, a screen loaded by the H_20xRJ45 sending card and H_16xRJ45+2xfiber sending card does not support calibration. Only a combined screen loaded by the cards of a single type supports calibration. 4. The H_4xfiber sending card does not support the upload acceleration of calibration coefficients. If you want to calibrate a screen loaded by this card, NovaLCT of V5.4.7 is required. 5. If the LED image is overexposed when the 10-bit function is enabled first time, you need to read back the receiving card information in NovaLCT and then send 10-bit data via NovaLCT to resolve this issue. *****************************************2024.09.24 H V1.9.8.0 (H2, H5, H9, H9 Enhanced, H15, H15 Enhanced, H20)********************************************************************** [Supporting Software] NovaLCT V5.5.0 SmartLCT V3.5.13.Beta H Series_Windows (The software version after successful installation: SmartLCT V3.5.13.Beta. The H_4xfiber sending card is not supported) [New Features] 1. Support the H_2xHDMI2.0+2xDP1.2 input card and H_2xHDMI2.0 input card across the entire H series devices. 2. Support the operations of brightness adjustment, OSD turning on/off, 3D eye priority switching and screen locking on the device LCD screen. 3. Support the H_1xNDI input card. 4. Support scheduled brightness adjustment for the loaded screen. [Improvements] 1. Work with the CVT10 and CVT4K to achieve the anti-interference solution. [Changes] None [Bug Fixes] 1. Fixed the problem of abnormal input cropping. 2. Fixed the problem of occasional slow communication between NovaLCT and the sending card. [Notes] If the firmware version is earlier than V1.9.4.0 and you need to update to V1.9.7.0 or later, please first update to any version between V1.9.4.0, V1.9.5.0, and V1.9.6.0. This is necessary because versions earlier than V1.9.4.0 have a limitation on the firmware package size. *****************************************2024.07.08 H V1.9.7.0 (H2, H5, H9, H9 Enhanced, H15, H15 Enhanced, H20)********************************************************************** [Supporting Software] NovaLCT V5.5.0 SmartLCT V3.5.4.Beta H Series_Windows (The software version after successful installation: SmartLCT V3.5.4.Beta. The H_4xfiber sending card is not supported) [New Features] 1. Support the H_1xNDI input card. 2. The H_16xRJ45+2xfiber sending card and H_20xRJ45 sending card support the calibration acceleration function. [Improvements] 1. Optimized the logic of screen configuration and data recovery of the H_4xfiber sending card. 2. Optimized the memory reading timing of the H_4xHDMI output card and H_4xDVI output card. [Changes] None [Bug Fixes] 1. Fixed the problem of abnormal input cropping. 2. Fixed the problem that the H_20xRJ45 sending card was unable to read back receiving cards. 3. Fixed the occasional signal recognition problems on the H_2xHDMI2.0 input card after powering on. [Notes] None *****************************************2024.05.29 H V1.9.6.0 (H2, H5, H9, H9 Enhanced, H15, H15 Enhanced, H20)********************************************************************** [Supporting Software] NovaLCT V5.5.0 SmartLCT V3.5.4.Beta H Series_Windows (The software version after successful installation: SmartLCT V3.5.4.Beta. The H_4xfiber sending card is not supported) [New Features] 1. Support the H_1xST 2110 input card. [Improvements] None [Changes] None [Bug Fixes] 1. Fixed the problem of abnormal sending card status displayed on the monitoring window in LCT. 2. Fixed the occasional self-test errors for the H_20xRJ45 sending card. [Notes] None *****************************************2024.02.03 H V1.9.4.0 (H2, H5, H9, H9 Enhanced, H15, H15 Enhanced, H20)********************************************************************** [Supporting Software] NovaLCT V5.4.8 SmartLCT V3.5.4.Beta H Series_Windows (The software version after successful installation: SmartLCT V3.5.4.Beta. The H_4xfiber sending card is not supported) [New Features] 1. Support the H_2xfiber input card. 2. Support the H_1x12G SDI output card. 3. Add the accompanied audio function for the H_2xDP1.1 input card. [Improvements] None [Changes] 1. Changed the default fonts of the OSD text. [Bug Fixes] 1. Fixed the problem of color cast when the H_2xHDMI2.0+2xDP1.2 input card is used. 2. Fixed the problem of abnormal display during preset switching. 3. Fixed the problem that the H_2xRJ45+1xHDMI1.3 preview card may not be identified by the device after update. [Notes] None *****************************************2023.11.17 H V1.9.2.0 (H2, H5, H9, H9 Enhanced, H15, H15 Enhanced, H20, H20 Enhanced)********************************************************************** [Supporting Software] NovaLCT V5.4.7.1 (NovaLCT V5.4.4.6.CTM7401 is required if you use the H_4xfiber sending card) SmartLCT V3.5.4.Beta H Series_Windows (The software version after successful installation: SmartLCT V3.5.4.Beta. The H_4xfiber sending card is not supported) [New Features] 1. Add the accompanied audio function for H_4xHDMI input card, H_1xHDMI2.0 input card, H_2xHDMI2.0 input card, H_1xHDMI2.0+1xDP1.2 input card, H_2xDP1.1 input card, H_1xDP1.2 input card and H_2xHDMI2.0+2xDP1.2 input card. 2. Support the new cards, including H_4x3G-SDI output card, H_4xHDBaseT input card, H_4xHDBaseT output card and H_2xAudio input+2xAudio output card. 3. Support the input source sync. 4. Support the scheduled preset playback. 5. Support the H20 master. [Improvements] None [Changes] None [Bug Fixes] None [Notes] None *****************************************2023.06.05 H V1.6.4.0.STD (H2, H5, H9, H9 Enhanced, H15, H15 Enhanced)********************************************************************** [Supporting Software] NovaLCT V5.4.4.6 (NovaLCT V5.4.4.6.CTM7401 is required if you use the H_4xfiber sending card) SmartLCT V3.5.4.Beta H Series_Windows (The software version after successful installation: SmartLCT V3.5.4.Beta. The H_4xfiber sending card is not supported) [New Features] None [Improvements] None [Changes] None [Bug Fixes] 1. Fixed the problem that the screen monitoring information is still displayed after the input source connector is unplugged. *****************************************2023.05.18 H V1.6.3.0.STD (H2, H5, H9, H9 Enhanced, H15, H15 Enhanced)********************************************************************** [Supporting Software] NovaLCT V5.4.4.6 (NovaLCT V5.4.4.6.CTM7401 is required if you use the H_4xfiber sending card) SmartLCT V3.5.4.Beta H Series_Windows (The software version after successful installation: SmartLCT V3.5.4.Beta. The H_4xfiber sending card is not supported) [New Features] None [Improvements] 1. Optimized the input source stability. 2. Optimized the H_2xRJ45 IP input card functions. [Changes] None [Bug Fixes] 1. Fixed the problem that you need to refresh the page to display a new open API project. [Notes] None *****************************************2023.03.01 H V1.6.1.0.STD (H2, H5, H9, H9 Enhanced, H15, H15 Enhanced)********************************************************************** [Supporting Software] NovaLCT V5.4.4.6 (NovaLCT V5.4.4.6.CTM7401 is required if you use the H_4xfiber sending card) SmartLCT V3.5.4.Beta H Series_Windows (The software version after successful installation: SmartLCT V3.5.4.Beta. The H_4xfiber sending card is not supported) [New Features] None [Improvements] None [Changes] None [Bug Fixes] 1. Fixed the problem of abnormal diagnostics of the H_1xHDMI2.0+1xDP1.2 input card of the new version. 2. Fixed the problem that the prompt appears on the LCD screens of the H2, H5, and H9, indicating that the H_1xHDMI2.0+1xDP1.2 input card of the new version is not supported. 3. Fixed the problem that the indicators of the H_1xHDMI2.0 input card and H_2xHDMI2.0 input card of the old version are not lit. [Notes] None *****************************************2023.02.16 H V1.6.0.0.STD (H2, H5, H9, H9 Enhanced, H15, H15 Enhanced) ********************************************************************** [Supporting Software] NovaLCT V5.4.4.6 (NovaLCT V5.4.4.6.CTM7401 is required if you use the H_4xfiber sending card) SmartLCT V3.5.4.Beta H Series_Windows (The software version after successful installation: SmartLCT V3.5.4.Beta. The H_4xfiber sending card is not supported) [New Features] 1. Support the H_4xfiber sending card. 2. Support the optimized IPC function scheme, including the creating, deleting and updating of the IPC sources. 3. Support the IPC resource management under different modes (200W/400W/800W) and support IPC card mode switching and hot swap. 4. Support the IPC layer editing, preset management and other functions. 5. Support the IPC resource decoding details. 6. Support the layer layout setting function (standard and custom) on the Web control page. 7. Support the input source backup function. 8. Support the function of selecting whether to save OSD/BKG during the preset saving process. [Improvements] 1. Optimized the problem of the image display cannot be recovered or is abnormal during the hot swap process. [Changes] None [Bug Fixes] None [Notes] None *****************************************2022.12.01 H V1.5.6.0.STD (H2, H5, H9, H9 Enhanced, H15, H15 Enhanced) ********************************************************************** [Supporting Software] NovaLCT V5.4.2 SmartLCT V3.5.4.Beta H Series_Windows (The software version after successful installation: SmartLCT V3.5.4.Beta) [New Features] None [Improvements] 1. Optimized the communication between the RJ45 sending cards and receiving cards. [Changes] None [Bug Fixes] None [Notes] None *****************************************2022.11.04 H V1.5.5.0.STD (H2, H5, H9, H9 Enhanced, H15, H15 Enhanced) ************************************************************************ [Supporting Software] NovaLCT V5.4.2 SmartLCT V3.5.4.Beta H Series_Windows (The software version after successful installation: SmartLCT V3.5.4.Beta) [New Features] None [Improvements] None [Changes] None [Bug Fixes] 1. Fixed the problem of misplaced display caused by the abnormal resolution of the front panel. 2. Fixed the problem of asynchronous display when the screens with different resolutions are added. 3. Fixed the problem of abnormal connector indicator status of some H_2xHDMI2.0+2xDP1.2 input cards. 4. Fixed the problem of communication timeout of the H_2xRJ45+1xHDMI1.3 preview card. 5. Fixed the problem of inverse display of red and blue components when you calibrate the screen loaded by the H_20xRJ45 and H_16xRJ45+2xfiber sending cards. [Notes] None *****************************************2022.08.30 H V1.5.3.0.STD （H2, H5, H9, H9 Enhanced, H15, H15 Enhanced）********************************************************************** [Supporting Software] NovaLCT V5.4.2 SmartLCT V3.5.4.Beta H Series_Windows (The software version after successful installation: SmartLCT V3.5.4.Beta) [New Features] None [Improvements] None [Changes] None [Bug Fixes] 1. Fixed the problem that the monitoring screen flickers occasionally. Other functions are not affected. [Notes] None *****************************************2022.06.20 H V1.5.1.0.STD （H2, H5, H9, H9 Enhanced, H15, H15 Enhanced）********************************************************************** [Supporting Software] NovaLCT V5.4.2 SmartLCT V3.5.4.Beta H Series_Windows (The software version after successful installation: SmartLCT V3.5.4.Beta) [New Features] 1. Support the H_1xDP1.2 input card and H_2xHDMI2.0+2xDP1.2 input card. [Improvements] 1. Optimized the H_2xRJ45 IP input card functions. [Changes] None [Bug Fixes] None [Notes] None *****************************************2022.03.11 H V1.4.4.0.STD (H2, H5, H9, H9 Enhanced, H15, H15 Enhanced H V1.4.3.0.STD)********************************************************************** [Supporting Software] NovaLCT V5.4.2 SmartLCT V3.5.4.Beta H Series_Windows (The software version after successful installation: SmartLCT V3.5.4.Beta) [New Features] None [Improvements] 1. Optimized the product update method. [Changes] None [Bug Fixes] None [Notes] None *****************************************2021.11.23 H V1.4.2.0.STD (H2, H5, H9, H9 Enhanced, H15, H15 Enhanced H V1.4.1.0.STD)********************************************************************** [Supporting Software] NovaLCT V5.4.2 SmartLCT V3.5.4.Beta H Series_Windows (Software version after successful installation: SmartLCT V3.5.4.Beta) [Feature Content] (1) Modular and plug-in design, free combination at your will 1. Two kinds of LED 4K sending cards (H_20xRJ45 sending card and H_16xRJ45+2xfiber sending card) 2. Multi-capacity configuration on a single card slot 3. Simple screen configuration using a single card and connector 4. Online status monitoring of all input and output cards 5. Hot-swappable input and output cards 6. H_2xRJ45 IP input card supports up to 100 IP camera inputs and input mosaic 7. Auto decryption of HDCP-encrypted sources 8. Decimal frame rates supported 9. HDR10 and HLG processing (2) Multi-screen management for centralized control 1. Each screen can have its own output resolution 2. Output mosaic 3. Irregular screen configuration 4. Input source grouping management 5. Eye saver mode 6. LCD bezel compensation (3) Diverse display possibilities for flexible configuration 1. Multi-layer display 2. High-definition scrolling text 3. Up to 2,000 presets 4. Scheduled playback of preset playlist 5. OSD settings on a single screen and adjustable OSD transparency 6. BKG settings 7. Channel logo management 8. Input source cropping and renaming after cropping 9. HDR and 10-bit video processing, allowing for a more exquisite and clear image 10. Color adjustment 11. XR scenario control 12. 3D function 13. Low latency (4) Web-page control, easy, friendly and convenient 1. Web control 2. Monitoring of inputs and outputs on Web page 3. Firmware update on Web page 4. Eye saver mode on Web page operations 5. Ark Visualized Management and Control Platform App control on pad device (5) Status monitoring for better stability and reliability 1. Self-test for fault detection 2. Backup design 3. Auto monitoring and alarms