*****************************************2022.09.15   NovaPro UHD Jr V1.6.1.0.STD**********************************************************************
 [Supporting Software Version]
	V-Can V3.7.0.S2.T3 or later
	NovaLCT V5.2.2 or later
 [New Features]
               1. Support the OSD function.		
 [Improvements]

 [Changes]
                      
 [Bug Fixes] 
               1. Fixed the problem of update failure on the Web page.

 [Notes]
               Currently, you need to use NovaLCT or V-Can to update the device to this version. You can perform the device update later on the Web page.

*****************************************2022.06.14   NovaPro UHD Jr V1.5.1.0.STD**********************************************************************
 [Supporting Software Version]
	V-Can V3.6.0, V-Can V3.5.0
	NovaLCT V5.2.2 or later
 [New Features]
                1. The HDMI connector supports YUV420 color space.	
 [Improvements]

 [Changes]
                1. Optimized the display of Self-Test function in the Advanced Functions menu.
 [Bug Fixes]  
	1. After powered off and then powered on, the screen has no output or the screen connection parameters are lost occasionally.
	2. Non-standard HDMI sources cannot be recognized occasionally. After they are disconnected and then connected, they can be recognized.
	3. Fail to change the subnet mask on the web.
	4. When a non-standard HDMI source is connected, the screen has color cast and becomes blurred occasionally.

**************************************************************2021.7.6   NovaPro UHD Jr V1.2.2.0**********************************************************************
 [Supporting Software Version]
	 NovaLCT V5.3.1 or later  
	 V-Can V3.6.0 or later 
	 SmartLCT V3.5.3 or later 	
 [New Features]
	 1. Support the 3D function and 1*1 mosaic layout (DVI Mosaic) to match V-Can.
 [Improvements]
         1. Optimized the synchronization scheme.
 [Changes]
         1. Released the HDCP function restriction on the HDMI 2.0 LOOP connector.  
 [Bug Fixes]  
         1. Fixed the problem that the "VS_CNT" item in the test result is highlighted in red when the device functions well.
         2. Fixed the problem of failing to set the device IP in V-Can under some circumstances.
         3. Fixed the problem that the layer width is incorrect when you enable the input crop function and then change the layer input resolution from the maximum to the minimum in pixel-to-pixel mode.
 [Notes]
          None

**************************************************************2020.9.30   NovaPro UHD Jr V1.2.1.0**********************************************************************
 [Supporting Software Version]
	   NovaLCT V5.3.1 or later 
	   V-Can V3.5.1 or later (This version of V-Can is not released on the official website. Please contact our salesperson or technical support staff if needed.)
	   SmartLCT V3.5.3 or later	
 [New Features]
	 1. Support Web control.
	 2. Support turning on or off the HDCP function in the hidden menu.
	 3. Support working together with the HDR Master 4K.
	 4. Support turning on or off the Limited to Full function in the input settings menu, and switching between Full and Limited.
	 5. Support customizing DVI sources for DVI Mosaic.
	 6. Support customizing DVI sources for DVI Mosaic and Limited to Full functions when the device works with V-Can. 
 [Improvements]
          1. Optimized the self-test menu. The abnormal items will be highlighted in red.
          2. Accelerated the calibration for the cascaded NovaPro UHD Jr units.
          3. Removed the limitation that the width loaded by a single Ethernet port cannot exceed 512 pixels when low latency is enabled.
          4. Changed the display of 576i and 480i on the device front panel screen to PAL (576i) and NTSC (480i).
 [Changes]
          None      
 [Bug Fixes] 
	  1. Fixed the problem that the parameters of extra-small area cropping from a high-resolution source cannot be saved.
	  2. Fixed the problem of abnormal display when the NovaPro UHD Jr works with V-Can for mosaic output.
	  3. Fixed the problem that a message prompts sometimes saying the capacity limit is exceeded when 3D function is enabled.
	  4. Fixed the problem that the last row of pixels is uncontrollable when HDR is enabled in some special screen configuration conditions.
	  5. Fixed the problem of failing to read the receiving card information when no layer is opened or the layer has no signal source.	 	 
 [Notes]
          None
                
************************************XXXX.XX.XX   XXXX VX.X.X.X   First Release  ******************************************************************
 [Supporting Software Version]